How to Choose the Right Submersible Cables for Your Needs

How to Choose the Right Submersible Cables for Your Needs

The selection of the appropriate Submersible Cables is vital for water pumps since the cables have to perform in difficult conditions and provide the electrical power flow to the motor all the time. The cable of a submersible pump has to operate in wet and dry environment, withstand bends and electrical loading, hence should have the required design.

Neon Cables is a manufacturer and supplier of cable solutions for various electrical applications, including Submersible Cables of different specifications. Choosing the most appropriate Submersible Cables will become easy for the customers who know about the size of the cable, material of conductors, cable insulation, installation depth and motor needs.

Start With the Pump and Installation Requirements

It is impossible to select the proper submersible cable without taking into account the pump it has to be used with. The power rating of the motor and the electricity supplied to it define the amount of current the cable has to conduct. The length of the cable also becomes significant since long cables have the risk of voltage drop.

Before buying Submersible Cables, customers have to specify the power rating of the motor, the operating voltage, the phase arrangement, the length of the cable, and the installation conditions. The cable, which is suitable for a small pump, does not necessarily fit a powerful motor.

For agricultural, residential, industrial water pumps and borewell installations, there are great differences between the requirements to the cables. The Neon Cables Company is able to meet the needs of customers who want to purchase a Submersible Cable according to their electrical application.

Cable Size Has a Direct Effect on Performance

One of the first technical characteristics customers have to take into consideration when selecting the Submersible Cable is the conductor size. Usually, the size of the cable is chosen depending on the current and length of the cable run.

When the cable is too small for the application, it can have excessive voltage drop and overheating. At the same time, a cable with suitable cross-section guarantees sufficient current-carrying capacity.

Therefore, customers should choose a Submersible Cable neither by its appearance nor by the price. The cable size should be matched to the requirements of the motor manufacturer and the electrical installation.

Insulation Matters When the Cable Is Underwater

Submersible Cables have to function in such conditions when ordinary indoor wiring cannot be used. It is required that insulation would offer sufficient protection from moisture and installation environment.

Construction of the cable should be chosen depending on whether it is going to be installed in a borewell, water tank or other underwater environment. Moreover, cable construction and insulation should resist mechanical conditions associated with the process of installation and work.

This is an important difference between Submersible Cables and ordinary building wiring. There is no necessity in using the product intended for indoor electrical connections for underwater pump installation.

Conductor Material and Electrical Efficiency

Conductor serves to transport electrical current from power source to motor. Copper is one of the most popular materials for construction of electrical cables due to high electrical conductivity.

Customers are expected to check the conductor construction and corresponding specifications before buying. In case of long period of time of working of pump, it is important to use high-quality conductors.

Neon Cables produces electrical cable products with taking into account peculiarities of different applications. The customers are offered to choose the proper cable construction according to application.

Consider the Total Cable Length

Cable length is often overlooked by customers choosing Submersible Cable. However, distance between electrical power supply and pump influences on electrical characteristics of system.

In case of short installation of pump, voltage drop may be relatively small. Long borewell or cable way will increase consideration of voltage drop. Thus, the size of cable should not depend solely on horsepower of motor.

Customers are required to inform about length of cable before ordering it together with motor rating. It will be enough for supplier or electrical expert to find proper specification.

Important Factors to Check Before Buying

Customers may consider the following points as a basic check list while comparing Submersible Cables:

• Motor Power: Look at the power rating of the pump motor.
• Cable Length: The total length of the cable should be taken into consideration from the supply end to the motor end.
• Voltage: The voltage required for the operation of the pump.
• Phases: Single Phase or Three Phase pump motor.
• Conductor: Type of conductor used.
• Insulation: Insulation of the cable suitable for submersible use.
• Environment: Borewell depth, nature of water, and mechanical strength.

This is much more important than picking up a cable just because it is a submersible cable.

Submersible Cable vs Flexible House Wire

Customers sometimes compare Submersible Cables with Flexible House Wire because both are available in flexible constructions. However, they serve different purposes.

Flexible House Wire should therefore not be treated as a substitute for a cable specifically intended for submersible pump applications.

Where House Wire Manufacturers Fit Into the Electrical System

House wire and submersible pump cable are two different uses of cables; however, both involve correctly chosen electrical cables. House Wire Manufacturers manufacture wires needed for house circuits like lights, fans, sockets, and appliance use.

Neon Cables serves all the purposes of different applications of electrical cable requirements. This 

gives a customer an option to recognize differences between products used for household wires and specialized installation like water pumps.

Choosing correct products for different uses is significant since the cable structure depends on the environment and electrical load in which it will operate.

Benefits of Choosing the Right Cable From Neon Cables

Appropriate selection of a cable allows the customer to create more reliable pumping installation. Choosing a conductor size, insulation, length, and electrical rating, which suits pump requirements, makes cable more suitable for its purpose.

For customers interested in buying products from Neon Cables, they should consider their installation requirements and choose the cable products based on them. The range of Neon Cables includes products for different electrical applications, House Wire requirements and specialized cable needs.

When the customer is buying Submersible Cables, it is crucial for him to choose cable products according to the application requirement because in this case cable becomes part of the system, which will operate under water for a long time period.

Questions Customers Commonly Ask

Is a regular household wire suitable for submersible pump?

The Regular Flexible House Wire is made to be used in house wiring and thus cannot be taken for granted in being used for submerged pumps.

What makes me choose the right cable size for my pump?

The cable size depends on such variables as the power of the motor, current, voltage, phases, and length of the cable among others.

Does the length of the cable matter when choosing the correct one?

Yes. The voltage drop increases with increase in length and the conductor sizes used will vary accordingly.

Are all submersible cables suitable for all borewells?

No. The correct cable is chosen by the customer based on the specifications such as the rating of the pump, depth, water conditions and other mechanical needs.

Choosing Submersible Cables With Neon Cables

The correct selection of the Submersible Cable should come through as part of the entire pumping system instead of being a separate electrical item. Factors such as motor horsepower, length of cable, construction of conductors, type of insulation, voltage, and the environment of installation affect the correct selection.

Neon Cables manufactures cables that meet the various needs in electrical installations, among which include the use of Submersible Cables and Flexible House Wire. By knowing the exact needs of the pump and its installation, one can select the correct cable for the installation environment.